home *** CD-ROM | disk | FTP | other *** search
- DOGA-L1 CG Animation kit for beginners
- Version E1999.5.1
-
- What is DOGA-L1
- ---------------------
- DOGA-L series is software which you can use to produce Computer
- Graphics animations (CGA). People say that learning CG software is
- difficult. DOGA-L series is designed so that you can learn gradually
- from a beginner to an advanced stage. DOGA-L1 is the first step of
- the series.
-
- System requirements
- -------------------
- Personal computer:
- IBM compatible (minimum Pentium 90MHz, over 133MHz is recommended).
- OS:
- Windows95 (DirectX3b or later needed) is recommended.
- WWW browser must be installed. (Netscape 3.0 or later, or Internet
- Explorer 3.0 or later is recommended.)
- Memory:
- At least of 24MB RAM, over 32MB is recommended.
- Free Hard-drive space:
- At least 30MB, over 40MB is recommended.
- Display Adapter
- At least High-Color(16bit), True-Color(24bit) is recommended.
-
- How to install
- --------------
- "DL1E9905.EXE" is DOGA-L1 installer. Please execute it and follow
- the messages.
-
-
- License
- -------
- DOGA-L1 is free to use for non-commercial purpose. If you want to
- use for commercial purpose, please contact us.
-
- -------<License agreement>
- DOGA Corporation ("DOGA")
- END USER LICENSE AGREEMENT FOR DOGA-L1
-
- Do not install or use the Software until you have read and accepted all of
- the license terms. Permission to use the software is conditional upon your
- agreement to the license terms.
- If you do not agree to the terms of license agreement, please remove the
- Software promptly from your computer.
-
-
- 1.Grant of license The DOGA software is licensed as follows:
-
- You are granted limited, non-exclusive, nontransferable license to use the
- DOGA product in consideration of the payment of the registration fee.
- You may use the Software on one computer at any time for use only in the
- End-User's own business.
- You may not copy or reproduce the Software except the archival purpose.
-
- 2. Copyright.
-
- The Software is owned by DOGA and is protected by Japanese copyright laws
- and international provisions.
- The copyright of L1 preset parts belongs to DOGA. The copyright of all
- visual content produced using L1 belongs to you and DOGA. You can use
- them for personal use and exhibit them at CG contests etc. If you would
- like to use them for business purposes, DOGA's permission is required.
- Visual content and models produced using any part or function of L1 for
- non-profit purposes including personal and group homepages is allowed.
- In these cases, please mention that they are the products of DOGA-L1
- and put a DOGA banner on the homepage.
-
-
- 3. No warranty.
-
- This product is provided "as is" without warranty of any kind. DOGA does
- not and cannot warrant the performance or results you may obtain by using
- the Software. In no event will DOGA be liable to you for any consequential,
- incidental, direct, indirect, special, punitive, or other damages whatsoever
- (including, without limitation, damages for loss of business profits,
- business interruption, loss of business information, loss of savings or
- other pecuniary loss) arising out of this agreement or use of or inability
- to use the Software, even if DOGA has been advised of the possibility of
- such damages.
- In United States, some states/jurisdictions do not allow the exclusion or
- limitation of liability for consequential or incidental damages. So the
- above limitation may not apply to you.
-
-
- 4. Termination.
-
- This license will terminate immediately without notice from Licensor if
- you fail to comply with the terms and conditions of this license agreement.
- In such case, you must remove the Software promptly from your computer.
-
-
- 5. Export law assurances.
-
- The end user agrees that the Software is to be used in the United States,
- the United Kingdom, France, Germany, Italy, Holland, Australia, New Zealand
- and Malaysia.
- -------<The end of the License agreement>
-
-
- Version up history
- ------------------
-
- DOGA-L1+L2 Ver.E1999.2.22 -> Ver.E1999.5.1 Version up
-
- o Required hard drive space is decreased about 10MB.
- (The format of background image is changed from original to JPEG.)
- o Package is separeted from DOGA-L1+L2 to DOGA-L1 only.
-
-
- DOGA-L1+L2 Ver.E1999.1.15 -> Ver.E1999.2.22 Version up
-
- The changed points from Ver.E1999.1.15 to Ver.E1999.22 are mainly the
- modifications of bugs. New functions are not added.
-
- o The whole
- The font is changed to be easy to read and letters are modified to be
- shown properly.
- Miss spellings are corrected.
-
- o Parts Assembler
- o Thumb nails of parts list (when you select "add part") are modified to
- see clearly.
- o The bug that it takes a lot of time to end right after you save is
- modified.
- o The bug that you can't select over 1024 parts at the same time is
- modified..
-
- o Motion Editor
- o The bug that it takes a lot of time to end right after you save is
- modified..
-
- o Render / View animation
- o The bug that you can't render very small parts/objects is modified.
- o The bug that a background is sometimes shifted is modified.
-
- Contact
- -------
- web page: http://www.doga.co.jp/english/
- e-mail: e-support@doga.co.jp
- Address: 5-17-2-102, Awaji, Higashiyodogawa, Osaka 533-0032, JAPAN
- FAX: +81-6-6321-4841
-
- For basic inquiries about using L1, we suggest that you check our
- homepage. It is likely that another user will help you.
-